Wind Uplift Analysis Request Project: Sales Rep: Sales Rep Email: Date: Total SQ Feet: Project Address: Closest Major City:Specification Requirements: Are Specifications Available? (if yes, please provide a copy)YesNo Panel Width & Gauge Being Proposed: Select all that apply:FM 1.75 (Only Series 300, S-316, .040" Aluminum, 16" panel over 14-gauge purlin @ 4' o.c.)FM 1.90 (Only Series 300, S-316, 24-gauge steel, 16" panel over 14-gauge purlin @ 2' o.c.) FM 1.120 (Only Series 300, S-312, 22-gauge steel, 12" panel over 16-gauge purlin @ 5' o.c.)FM 1.135 (Only Series 300, S-312, 22-gauge steel, 12" panel over 14-gauge purlin @ 2' o.c.)UL 90ASTM E 1592ASTM E 331 (E 1646)ASTM E 283 (E 1680) What is the building code? Other Known Design Criteria: P.E. Stamp Required For: (check which apply)Uplift PressuresShop DrawingsBuilding Exposure: Check Appropriate Category:B: Building located in city center, with 50% of buildings adjacent over 70 ft. in height. Urban and suburban with surrounding obstructions less than 3 stories high.C: Open fields with scattered obstructions, or rolling hills.D: Flat and unobstructed areas for at least 1 mile adjacent to building. (coastal areas / plains) Check Appropriate Description:Enclosed: All sides are walled.Partially Enclosed: At least half the sides are walled. (garages, hangars)Open: No walls. (canopies, pavilions) Building usage & approx. number of occupants at any time in a specific area: (e.g. School-1,200 students in auditorium):Building Geometry: Check Appropriate Roof Geometry:GableHipMonoslopeMultiple GableBarrel / ArchSaw Tooth Roof Pitch: Eave Height: Horizontal Run to Ridge: Length of Building: Width of Building: Is there a Parapet Wall?YesNo If so, how high is it? Curved Panel?YesNo If yes, provide radius: If radius is NOT available, provide chord & height dimensions:Roofing Substrate Assembly: Type of Roof Assembly Being Specified:Steel DeckConcrete DeckPlywood DeckLightweight Deck (lightweight concrete, cellular concrete, gypsum, tectim)Open Steel Purlins If Steel Deck, provide gauge: If purlins are specified over the deck, provide gauge & spacing o.c.: If Concrete Deck, provide thickness: If Plywood Deck, provide thickness: Lightweight Deck: If there is a steel deck beneath, what is the gauge? If Open Steel Purlins, provide gauge & spacing o.c.: If any insulation is specified over the decking, provide the type & thickness: Notes:Retrofit or Tear-Off Construction (if applicable) Type of existing roof assembly:Steel DeckConcrete DeckPlywood Deck If Steel Deck, provide gauge: If Concrete Deck, provide thickness: If Plywood Deck, provide thickness: Type of structural support beneath existing deck:Steel PurlinTimber PurlinLightweight Deck (lightweight concrete, cellular concrete, gypsum, tectim) If Steel Purlin, provide gauge & spacing o.c.: If Timber Purlin, provide thickness & spacing o.c.: If Lightweight Deck, provide thickness: Lightweight Deck: If there is a steel deck beneath, what is the gauge? If any insulation is over the decking, provide the type & thickness: If necessary, what type of framing system will be used? Additional Comments: Need assistance with this form?